DLP Cinema Projector
HOME DLP Cinema Projector HOME About Us
NC800C NC800C NC800C
NC800C NC800C NC800C
NC800C NC800C NC800C
NEC’s NC800C with state of the art technology is best suited for Small Screens up to 10 metres(32ft)*2 wide
  Perfect for screening rooms, post-production facilities and commercial cinemas with smaller screens, NEC’s NC800C is the world’s lightest digital cinema projector*1 for screens 4*3 to 10*2 metres wide. Using DC 2K DMD™ technology, and delivering pristine images at 2048 x 1080 pixel native resolution, the NC800C exceeds Texas Instruments’ guidelines for contrast ratio, colorimetry and uniformity.
World’s LIGHTEST DLP Cinema Projector1 for screens up to 10M(32ft)*1*2
Precise 2K (2048 x 1080) resolution
High contrast 2000:1 images
Space saving
- Best suited for Post Production, Studios and installations with limited space
Easy to operate
- Industry's FIRST memory functions for lens zoom, position/focus and lamp output *4
- Industry's FIRST lamp changes from the back of projector *1
- Direct selection buttons for 8 stored projector configurations
- Projector can be controlled from an optional touch screen
- Auto lamp brightness control
- Built-in webserver allows basic control from any web browser
Easy to carry
- Industry's FIRST DLP Cinema Projector which can be transported without
having to remove the lamp from the projector*1. Suited to rental application
Low maintenance
- DLP chip shielding prevents dust, oil and smoke particles from
setting DLP chip surface *4
*1 Among DLP Cinema Projectors, according to a survey conducted by NEC in June, 2007.
*2 This can be achieved under the below instllation conditions.
1) At screen gain 1.8/14ft-1
2) Use NEC high efficiency 4.0Kw lamp bulb "NC-16LP401"
*3 At screen gain 1.3/14ft-l
*4 Subject to installation conditions.
▲PAGE TOP
Specifications

Projection method 3-chip DLP chip reflection method
DLP chip specifications 1.2", 12° tilt angle, 2048 x 1080 pixels
Light Output *1 6,400Lumens*2
Supported screen sizes minimum
 -at screen gain 1.3 / 14ft-l 　4 meters (13 feet) *3
maximum -at screen gain 1.8 / 14ft-l　10 meters(32 feet) *2 *3
-at screen gain 1.3 / 14ft-l 　8 meters (26 feet) *3
Contrast ratio 2000 : 1 or above (full on / off) (T.B.D))
Primary lenses 1.25 to 1.45:1 "L2K-12ZM" (Note : select according to magnifications
of installation environment)
1.45 to 1.8:1 "L2K-14ZM"
1.8 to 2.4:1 "L2K-18ZM"
2.2 to 3.0:1 "L2K-22ZM"
3.0 to 4.3:1 "L2K-30ZM"
Lamp bulbs NEC High efficiency Xenon lamp bulbs
　• NEC 1.25kW lamp bulb "IS8LP4-E" (4 pcs lamps package)
*NEC 1.25kW High efficiency lamp bulb packed in the projector at the shipment of factory
*Standard film lamp bulbs cannot be used for NC800C
DLP Cinema functions CineLinkTM, CineCanvasTM, CinePaletteTM, CineBlackTM
Lens adjustment functions Motorized focus, zoom, horizontal/vertical shift*, light shutter(dowser)
*Range of motorized shift is dependent on lens
Cooling method 　• Air cooling system with dust preventing electro-static filter.
　• Total thermal dissipation : 7766BTU
　• Projector exhaust: 50CFM (cubic foot per minute)
Fan noise 45 dB (when set to low brightness mode)
Power supply voltage 100 to 120V or 200 to 240V AC, 50/60Hz, single phase
Rated input current 12A Max (100 to 120V)
8.5A Max (200 to 240V)
Power consumption 1200 to 1440W (100 to 120V)
1700W (200 to 240V)
Environment Operational temperatures 10°C to 35°C (41°F to 95°F), humidity : 10% to 80% (non-condensing)
Storage temperatures -10°C to 50°C(14°F to 122°F), humidity : 10% to 80% (non-condensing)
Regulations
  <Safety> <EMC>
USA UL60950 FCC Class A
Canada CSA60950 ICES-003 Class A
Europe EN60950 EN55022 Class A
EN55024-1998
EN61000-3-2
EN61000-3-3
Oceania IEC60950 AS/NZS 3548 Class A
1995+A 1/2:1997
Japan J60950 VCCI Class A
Asia EN60950 CISPR.Pub22
External dimensions Projector : 670(W) x 752(D) x 423(H) (mm)
26.3(W) x 30.1(D) x 16.7(H) (inch)
*Excluding lens, lens hood and handle.
*Pedestal for NC800C shall not be supplied by NEC.
Weight Projector : Approx.68kg / 150lb
*Excluding lens.
*Pedestal for NC800C shall not be supplied by NEC.
*1 Measured at center screen
*2 This can be achieved using NEC high efficiency 1.25Kw lamp bulb "IS8LP4-E"
*3 Subject to installation conditions.
Input/output terminals
Type Name Description Quantity
Input Terminals HDSDI port BNC 2
DVI port DVI-digital 2
External
control		 PC card slot For compact flash memory
card or wireless LAN card

1
LAN port RJ-45 2
USB port Type A 1
Serial port(RS-232C) D-sub (9-pin) 1
General Purpose Input / Output D-sub (37-pin) 1
Remote control connector Stereo mini 1
▲PAGE TOP
Standard supplied accessories
Remote control unit × 1
  Cable for remote control unit(16m / 629 in.) × 1
  Cable for remote control unit(4m / 157 in.) × 1
  User's manual
  Power Cord for NC800C projector
Optional accessories
Lamp house module with a new lamp bulb for NC800C IS "IS8LH-E"
Touch panel controller "NC-TP6402" & Holder arm kit "NC-TH6403"(w/AC adapter)
　*Air filter for NC800C shall be supplied with NEC Optional lamp house and lamp bulb.
  Anamorphic lens x1.25 "AL 1.25-E"*2 manual anamorphic turret "AS 1.25-E"
  　*Automatic anamorphic lens turret is not available with NC800C.
  Lens adapter for NEC primary lenses "NC-50LA01"
  Multi-Media Switcher for alternative content
 

MM2000, Standalone type Multi-Media Switcher
　*Video Input Board and Analogue RGB Input Board are included in MM2000 Multi-Media Switcher.
　*MM2000B, Built-in type Multi-Media Switcher is not available with NC800C.
　*Standalone type Multi-Media switcher with Video input & Analogue RGB input "MM2000"

    【Optional Input Boards for Multi-Media Switcher】
  • Single HD/SDI Input Board "MM-SDI-E"
  • DVI-D Input Board "MM-DVI-E"
  • Analogue RGB Input Board "MM-RGB-E"
  • Video Input Board "MM-VIDEO-E"
・Pedestal for NC800C shall not be supplied by NEC.
*1 Standard supplied accessories and Optional accessories are subject to change without notice.
*2 Anamorphic lens cannot be used with following primary lenses due to the limitation of the anamorphic lens
(for NC800C)
1.25 to 1.45:1 zoom "L2K-12ZM"
1.45 to 1.8:1 zoom "L2K-14ZM"
For Cinema Scope (CS) display with usage of above primary lenses, please use "scaling" function by masking top and bottom side of the screen without anamorphic lens.
If actual lens magnifications for CS display doesn't fit the attached primary lens,
please change into a primary lens fittable for CS display.
Dimensions
dimentions
System configuration
system configuration
DLP, DLP Cinema and their respective logos are registered trademarks or trademarks of Texas Instruments.
CineLink,CineCanvas,CinePalette and CineBlack are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
Specifications are subject to change without prior notice.
 
PAGE TOP
 
Copyright © NEC Display Solutions, Ltd. 2007-2008 All rights reserved. Terms of Use / Privacy / Contact Us