DLP Cinema projector : NC2500S

The world’s brightest^*1 projector designed for multiplexes with large screens up to 30 metres wide, NEC’s NC2500S digital cinema projector is the world’s brightest DLP Cinema projector. Delivering precise 2K (2048 x 1080) resolution and high contrast images (2000:1), the NC2500S digital cinema projector is easy to operate, extremely user friendly, and requires minimal maintenance.

World’s FIRST DLP Cinema Projector for screens up to 30M

- Industry's FIRST memory functions for lens zoom, position/focus and lamp output ^*1

- Industry's FIRST Lamp changes from the back of projector^*1

- Direct selection buttons for 8 stored projector configurations

- Projector can be controlled from an optional touch screen

- Auto lamp brightness control

- Standard Film projector lamps can be used^*3 (requires adapter available from NEC)

- Built-in webserver allows basic control from any web browser

- DLP chip shielding prevents dust, oil and smoke particles from settling on

DLP chip surface^*2

- Self-contained liquid cooling system - no external reservoir

*1	Among DLP Cinema Projectors, according to a survey conducted by NEC in June, 2007.
*2	Subject to installation conditions.
*3	Compatible third-party film projector lamps are listed on here.
*4	This can be achieved under the below instllation conditions. 1) At screen gain 1.8/14ft-1 2) Use NEC 6.0Kw lamp bulb "NC-LP6001"

▲PAGE TOP

Projection method

3-chip DLP chip reflection method

DLP chip specifications

1.2", 12° tilt angle, 2048 x 1080 pixels

Light Output ^*1

26,000 Lumens^*2

Supported screen sizes

minimum

-at screen gain 1.3 / 14ft-l　12 meters (40 feet) ^*3 ^*4

maximum

-at screen gain 1.8 / 14ft-l　30 meters(100 feet) ^*2^*5
-at screen gain 1.3 / 14ft-l　25 meters (82 feet) ^{*2 *5}

Contrast ratio

2000 : 1 or above (full on / off)

Primary lenses

1.25 to 1.45:1 zoom "L2K-12ZM" ^*6

(Note : select according to magnifications of installation environment)

1.45 to 1.8:1 zoom "L2K-14ZM" ^*6

1.8 to 2.4:1 zoom "L2K-18ZM"

2.2 to 3.0:1 zoom "L2K-22ZM"

3.0 to 4.3:1 zoom "L2K-30ZM"

Lamp bulbs

NEC High efficiency Xenon lamp bulbs
　• NEC 6.0 kW lamp bulb "NC-LP6001"
　• NEC 4.5 kW lamp bulb "NC-LP4501"
Select according to installation conditions
NEC recommends the use of NEC lamp bulbs in order to maximize luminance efficiency

Standard film lamp bulbs^*7

DLP Cinema functions

CineLink^TM, CineCanvas^TM, CinePalette^TM, CineBlack^TM

Lens adjustment functions

Motorized focus, zoom, horizontal/vertical shift*, light shutter(dowser)
*Range of motorized shift is dependent on lens

Cooling method

　• Liquid cooling system inside, air cooling system with dust preventing
electrostatic filter.
　• Total thermal dissipation: 30539BTU
　　(Input 7KW power to NEC 6.0KW lamp bulb)
　• Projector exhaust : 424CFM (cubic foot per minute)
　• Demand of exhaust duct : 565CFM (cubic foot per minute)

Fan noise

Less than 65 dB

Power supply voltage^*8

　• Projector head : 200 to 240V AC, 50/60Hz, single phase
　• Lamp power supply unit : 200 to 230V / 380 to 415V AC, 50/60Hz, 3 phases

Rated input current

Projector head : 5A Max
Lamp power supply unit : 28A Max

Power consumption

Projector head : 950W
Lamp power supply unit : 8000W

Environment

Operational temperatures

10°C to 35°C( 41°F to 95°F), humidity : 10% to 80% (non- condensing)

Storage temperatures

-10°C to 50°C(14°F to 122°F), humidity : 10% to 80% (non-condensing)

Regulations

USA	UL60950 FCC Class A
Canada	CSA60950 ICES-003 Class A
Europe	EN60950 EN55022 1998, Class A EN55024-1998, EN61000-3-2, EN61000-3-3
Oceania	EN60950 AS/NZS 3548 Class A 1995 + A1/2:1997
Japan	J60950 VCCI Class A
Asia	EN60950 CISPR Pub22

External dimensions

Projector head :
700 (W) x 1100 (D) x 503 (H) (mm)
27.6(W) x 43.3(D) x 19.8(H) (inch)
*Excluding lens, lens hood and exhaust stack.

Lamp power supply unit :
596(W) x 397(D) x 471(H) (mm)
23.5(W) x 15.7(D) x 18.6(H) (inch)

Projector head + Pedestal (NEC Option) :
700 (W) x 1100 (D) x 1367 (H) (mm)
27.6(W) x 43.3(D) x 53.5(H) (inch)
*Excluding lens, lens hood, exhaust stack and handle.
Including foot.

Weight

　• Projector head : Approx.120kg / 265lb
　 *Excluding lens.

　• Lamp power supply unit : Approx. 50.5kg / 112 lb

　• Projector head + Pedestal(NEC Option) : Approx. 255.5kg / 564 lb
　 *Including Lamp power supply unit

*1	Measured at center screen
*2	Subject to installation conditions.This can be achieved using NEC 6.0Kw lamp bulb "NC-LP6001"
*3	Subject to installation conditions
*4	When using 3kw film projector lamp bulb
*5	When using anamorphic lens
*6	Anamorphic lens cannot be used with following primary lenses due to the limitation of the anamorphic lens (for NC2500S) 1.25 to 1.45 : 1 zoom "L2K-12ZM" 1.45 to 1.8 : 1 zoom "L2K-14ZM" For Cinema Scope (CS) display with usage of above primary lenses, please use "scaling" function by masking top and bottom side of the screen without anamorphic lens. If actual lens magnifications for CS display doesn't fit the attached primary lens, please change into a primary lens fittable for CS display.
*7	Compatible third-party film projector lamp bulbs will be listed on here.
*8	Power cord for Projection head supplied with NC2500S. Power cord for Lamp power supply unit not supplied with NC2500S. Procurement for this cable is required by exhibitors.

Type	Name	Description	Quantity
Input Terminals	HDSDI port	BNC	2
Input Terminals	DVI port	DVI-digital	2
External control	PC card slot	For compact flash memory card or wireless LAN card	1
	LAN port	RJ-45	2
	USB port	Type A	1
	Serial port(RS-232C)	D-sub (9-pin)	1
	General Purpose Input / Output	D-sub (37-pin)	1
	Remote control connector	Stereo mini	1

▲PAGE TOP

	Remote control unit
	Cable for remote control unit (16 m / 629 inch)
	Lens adapter to be attached to NEC primary lenses
	User's manual
	Power cord for NC2500S Projection head (supplied under a separate carton)^*2
	(for US ： "NC-PC25U01", for Eu/Asia ： "NC-PC25E01", for Japan ： "NC-PC25J01")
	Film lamp adapter, for 4.0kw-7.0kw film projector lamp bulbs

	Pedestal for NC2500S projection head　 "NC-PD01"
	Pedestal for NC2500S and NC1600C projection head　 "NC-PD02"
	Air filter for replacement "NC-AF01"
	*This air filter should be replaced whenever a new lamp bulb is replaced.
	Touch panel controller "NC-TP6402" & Holder arm "NC-TH6402"
	Lamp house module without a lamp bulb for NC2500S "NC-LH01"
	Anamorphic lens x1.25 "AL 1.25-E"^*3 & motorized anamorphic turret "NC-AT02"
	Multi-Media Switcher for alternative content
	MM2000B, Built-in type Multi-Media Switcher
	*Video Input Board and Analogue RGB Input Board are included in MM2000B. 【Optional input Board for Multi-Media Switcher】 Single HD / SDI Input Board "MM-SDI-E" DVI-D Input board (Dual link) "MM-DVI-E" HDCP compliant DVI-D Input board (single link) "MM-70DV01" Analogue RGB Input Board "MM-RGB-E" Video Input Board "MM-VIDEO-E"
	Film lamp adapter, for 3.0kw film projector lamp bulbs "NC-25CL02"
	Lens adapter for NEC primary lenses "NC-50LA01"
Compatible third-party film projector lamp bulbs

*1	Standard supplied accessories and Optional accessories are subject to change without notice.
*2	When using 3kw film projector lamp bulb
*3	Anamorphic lens cannot be used with following primary lenses due to the limitation of the anamorphic lens (for NC2500S) 1.25 to 1.45:1 zoom "L2K-12ZM" 1.45 to 1.8:1 zoom "L2K-14ZM" For Cinema Scope (CS) display with usage of above primary lenses, please use "scaling" function by masking top and bottom side of the screen without anamorphic lens. If actual lens magnifications for CS display doesn't fit the attached primary lens, please change into a primary lens fittable for CS display.

DLP, DLP Cinema and their respective logos are registered trademarks or trademarks of Texas Instruments.
CineLink,CineCanvas,CinePalette and CineBlack are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
Specifications are subject to change without prior notice.

Terms of Use / Privacy / Contact Us